Suzhou mingda textile equipment co., LTD. Main products have been committed to textile equipment, the company's products are sold abroad, loved by new and old customers。
      Textile yarn tube also is one of the company's main products, textile yarn tube background of Beijing technology point was taken from the floorboard of the spinning and weaving, but with the continuous development of textile knowledge system and the discipline system and perfect, especially the nonwoven textile material and three-dimensional composite after weaving technology, and the textile is not only the traditional spinning and weaving, also including nonwoven technology, 3 d weaving technology, electrostatic nanometer technology into a net, etc., in the textile industry, the tube is mainly used for winding yarn, but currently use most of the bobbin to smooth the surface of the pipe surface, yarn in the winding process, easy to slip, easy to cause the yarn, Moreover, the yarn cannot be effectively fixed, which is inconvenient for people to use.
       The technical implementation elements of the new type of bobbin are as follows: A textile yarn tube, including the tube body, described the tube on either side of the fixed plate fixed connection with the first and second respectively fixed plate, as described in the right side of the first fixed plate opened the first groove, as described in the first groove to the left side of the inner cavity of fixed connection with motor, described in the motor shaft fixed connection with threaded rod, described the surface of the threaded rod has a threaded pipe set, as described in the right side of the threaded pipe through the first groove and extend to the tube with the inner fixed wires have a support bar, referred to the top of the support bar fixed connection link rod, referred to the top of the tube body opened the first 1 hole, described the hole on the bottom of the inner cavity support plate is fixed connection, Above the surface of the support plate to open the second hole, described the connection rod from one end of the support bar through the second hole and extends to the first a internal hole, described the first 1 hole cavity on the right side of the top fixed connection with the first fixed piece, described the first fixed piece of the left side of the opening is the first long hole, described the first long hole set inside a second fixed block, as described in the second to the left side of the fixed block throughout the first long hole and extend to the hole on the inside and link rod fixed connection, described the first fixed plate fixed connection with the left at the top of the controller, the controller and electric mechanical and electrical connections. Preferably, the shaft at the bottom of the support rod is fixedly connected with a sliding rod, and the bottom of the surface surface of the pipe body is provided with a first chute which is used together with the sliding rod, and the first sliding groove is connected with the sliding rod.